Anchoring system

Anchor located at the top of the ladder where the energy absorber is anchored. Maximum distance between steps 35 cm.

Anchoring system

Anchor located at the top of the ladder where the energy absorber is anchored. Maximum distance between steps 55 cm.

Lifeline extension system

The V 142 fixing system allows the lifeline to be “extended” 1.30 meters above the last step, thus allowing the user to access the upper level very easily.

Anchor for studs

Anchor located in the upper part of the upright, where the energy absorber is anchored. 4 screw fixing anchor.

Automatic continuous passage system

The cable goes inside a stainless tube that protects it. The V-LOCK trolley allows passage through it without any manipulation, always leaving both hands on the ladder.

• Own design and manufacturing, all stainless steel.
• It ensures that the cable can never be damaged by the wind when hitting the metal structure (main cause of wear).
• Simple fixing system to the steps using a clamp for square or circular profiles up to Ø 40 mm.
• M 8 stainless steel screws. with nuts with built-in DIN 6923 brake washers for greater ease and speed of assembly and user protection as there are no edges or other elements that could harm the user in their path.
• It allows the user to go up and down in complete safety, crossing the intermediate points without stops or any action on their part, always keeping both hands on the ladder (requirement required by regulations EN 353.1 2014 + A1 2017).
• Separated from each other every 8 meters (6 meters for outdoors), it prevents the user from separating from the ladder and causing the “arrow arc” effect on the line.
• The V 202 T intermediate piece allows the continuous passage of the V-LOCK fall arrest trolley.
• Laser marking of the part ensuring total traceability and graphic placement marking.

The only system on the market that combines ease of use and compatibility with any fall arrest cart.

The design of the CRISBE intermediate piece prevents the cable from coming out. Its mechanical characteristics allow the cable to be retained if it is pulled out with the weight of the operator.

In addition to its function of preventing the cable from exiting, the intermediate piece allows the operator to pass without any manipulation, both when ascending and descending, and with the majority of mobile fall arresters on the market.

In addition to all this, the CRISBE V 202 C intermediate piece from IGENA offers:

• Own design and manufacturing, with a robust stainless steel anodized aluminum profile. and stainless steel mechanism. Made of high tenacity polyamide reinforced with fiberglass and UV filter additive
• It ensures that the cable can never be damaged by the wind when hitting the metal structure (main cause of wear).
• It allows the user to go up and down in complete safety, crossing the intermediate points without stops or any action on their part, always keeping both hands on the ladder (requirement required by regulations EN 353.1 2014 + A1 2017).
• Separated from each other every 8 meters (6 meters for outdoors), it prevents the user from separating from the ladder and causing the “arrow arc” effect on the line.
• Laser marking of the part ensuring total traceability and graphic placement marking.

The only system on the market that combines ease of use and compatibility with any fall arrest cart.

The design of the CRISBE intermediate piece prevents the cable from coming out. Its mechanical characteristics allow the cable to be retained if it is pulled out with the weight of the operator.

In addition to its function of preventing the cable from exiting, the intermediate piece allows the operator to pass without any manipulation, both when ascending and descending, and with the majority of mobile fall arresters on the market.

In addition to all this, the CRISBE V 202 C intermediate piece from IGENA offers:

• Own design and manufacturing, with a robust stainless steel anodized aluminum profile. and stainless steel mechanism. Made of high tenacity polyamide reinforced with fiberglass and UV filter additive
• It ensures that the cable can never be damaged by the wind when hitting the metal structure (main cause of wear).
• It allows the user to go up and down in complete safety, crossing the intermediate points without stops or any action on their part, always keeping both hands on the ladder (requirement required by regulations EN 353.1 2014 + A1 2017).
• Separated from each other every 8 meters (6 meters for outdoors), it prevents the user from separating from the ladder and causing the “arrow arc” effect on the line.
• Laser marking of the part ensuring total traceability and graphic placement marking.

New rotational energy absorption system

New rotational energy absorption system with a fall indicator due to abnormal overexertion in the line, through which an indicator appears that the absorber has acted.

Piece that allows the effort transmitted to the body during the retention phase of the fall to be reduced to less than 450 daN, with a travel of less than 40 cm

Own design and manufacturing, all in stainless steel (body and mechanism) with PVC trim and anodized aluminum plate. Patented model EP18209587.7.

• Own design and manufacturing, all stainless steel.
• It ensures that the cable can never be damaged by the wind when hitting the metal structure (main cause of wear).
• Simple fixing system to the steps using a clamp for square or circular profiles up to Ø 40 mm.
• M 8 stainless steel screws. with nuts with built-in DIN 6923 brake washers for greater ease and speed of assembly and user protection as there are no edges or other elements that could harm the user in their path.
• It allows the user to go up and down in complete safety, crossing the intermediate points without stops or any action on their part, always keeping both hands on the ladder (requirement required by regulations EN 353.1 2014 + A1 2017).
• Separated from each other every 8 meters (6 meters for outdoors), it prevents the user from separating from the ladder and causing the “arrow arc” effect on the line.
• The V 202 T intermediate piece allows the continuous passage of the V-LOCK fall arrest trolley.
• Laser marking of the part ensuring total traceability and graphic placement marking.
• Suitable for lines up to 3 simultaneous USERS.
• Small size, without edges or other elements that could harm the user as they pass by.
• It allows the security of having permanent protection of the line against any manipulation, accident or improper use of it.
• Since this energy absorber is all metallic, the V 300 (unlike others on the market that are textiles or foams) does not have a pre-established expiration date.

Sliding fall arrester (fall arrester), the connection between the cable and the user

The sliding fall arrester is the connection between the cable and the user. Its reliability, robustness and ease of handling are essential criteria when choosing a lifeline.
vertical.

IGENA presents the new model of anti-fall trolley for its vertical lifelines, which adjust to all the needs of users, whose main characteristics are:

• Own design and manufacturing, in stainless steel (entire body and mechanisms) and anodized aluminum (gate and carabiner). Patented model EP 18209590.1
• Simple and compact handling, easily attached to any point on the line.

• Fall arresters suitable for the modern system of continuous passage through intermediate anchors (ref V 202 T) and with the popular “CRISBE” intermediate anchor (ref V 202 C).
• Excellent behavior and greater smoothness both up and down, due to its weight/spring force ratio.
• Certified for users from 50 to up to 150 kg.
• Possibility of customizing with the client's logo.
• Modern ergonomic design, with easy and intuitive gate opening system (double action according to standard).

• Integrated anti-twist positioning system (can never be placed in reverse) and provided with an integrated carabiner.

• V-LOCK: Equipped with a built-in fall sensor, which absorbs energy and detects any overexertion on the cart, whether due to a user fall or improper handling or use of the cart.
• V-LOCK PRO: Equipped with an integrated metal shock absorber.
• They come in a comfortable case for storage.

Optimal cable tension guarantee

The tensioner always guarantees optimal cable tension, without the need to measure or control the tension. It is equipped with a stainless steel tensioning/regulating spring, for self-tensioning. It is anchored by a point on a rung of the ladder.

IGENA's constant desire to innovate has led to the creation of the V 402 tensioner. And it has done so from the point of view of the user and the installer.

• Always guarantees optimal cable tension, without the need to measure or control the tension. It is enough to loosen the nut a few turns to see the cable taut, with a guaranteed tension between 23 and 30 daN.
• Own design and manufacturing, with a robust stainless steel anodized aluminum profile and all stainless steel mechanism.
• Small size, without edges or other elements that could harm the user as they pass by.
• The V 402 tensioner equipped with a stainless steel tensioner/regulator spring, for SELF-TENSIONING (unlike other manufacturers that place rigid tensioners on the line without the possibility of regulating the correct tension of the line) protects the line by avoiding the effect “arrow arch” reducing the stress on the upper and lower anchors.
• Includes a witness that the lifeline is operational.
• The V 402 tensioner, with an integrated indicator that the line is operational in the same lower anchorage of the line, allows the user to indicate at all times and from the beginning of the ascent that the line is in correct use.

Optimal cable tension guarantee

The tensioner always guarantees optimal cable tension, without the need to measure or control the tension. It is equipped with a stainless steel tensioning/regulating spring, for self-tensioning. This anchor is anchored at two points with an aluminum profile.

Optimal cable tension guarantee

The tensioner always guarantees optimal cable tension, without the need to measure or control the tension. It is equipped with a stainless steel tensioning/regulating spring, for self-tensioning. It is anchored to the upright with a 4-screw fixation.